Mike Here. I generated a G code in Sheetcam but when we try to load that into Mach3 there is nothing there. In the message box it says "Cannot use two G codes that both use thesame axisvalues" (see atatched).
Any help would be much appreciated!
Thanks
G code problem in MAch 3
-
admin@weldyne.co.za
- Posts: 5
- Joined: Mon Oct 02, 2023 11:30 am
G code problem in MAch 3
- Attachments
-
- WhatsApp Image 2023-10-05 at 12.04.15.jpeg (226.61 KiB) Viewed 3261 times
-
Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: G code problem in MAch 3
What post processor are you using?
Could you post a copy of the tap file here.
Could you post a copy of the tap file here.
-
admin@weldyne.co.za
- Posts: 5
- Joined: Mon Oct 02, 2023 11:30 am
Re: G code problem in MAch 3
Not to worry. I have solved the problem: I had loaded a sample of another file to see how tool changes can be effected in sheetcam. I accidentally save the toolset for that file which then changed all my settings and added in the extra G code. Loaded an old job file that I had and that reset my tools etc. All working now, thanks