Simulation
Posted: Sat Apr 15, 2023 9:44 am
Old user but new CNC machine and learning some new commands.
I'm simulating my cutting but the cutter is 60 mm above the part. Not sure where I'm going wrong.
Start depth = 0 (50mm part off table)
Cut depth 5
I'm simulating my cutting but the cutter is 60 mm above the part. Not sure where I'm going wrong.
Start depth = 0 (50mm part off table)
Cut depth 5
- Simulation.jpg (67.46 KiB) Viewed 55742 times