Fanuc OMD post processor
Posted: Wed Apr 05, 2023 9:03 am
Hi all. Anyone have a Fanuc OMD post processor or suggest what one to start with .
Thanks Wallace.
Thanks Wallace.
Made some progress.
2 issues.
1:The OMD controller needs a file name like :0000-> :9999. Not sure how to enter this without editpad.
I need the file format to be
%
:XXXX (PROGRAM NAME)
then my g-code
2:The OMD only like capital letters so Units Metric becomes UM. Any way to change this ?
Cheers Wallace.