I'm new in sheetcam and plasma.
I have a Chinese Plasma CNC Fangling F1621. I use the Fangling Plasma postprocessor in Sheetcam.
During the cutting process, sometimes the plasma doesn't turn off during a move between cuts, so the part is damaged
Should I use another postprosser or are there any settings I should adjust to avoid this problem ?
For example for this piece, the blue moves are ok, the red is cut
Cutting while moving
- Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: Cutting while moving
Could you attach a copy of the g-code file.