Page 1 of 1
How to edit toolbar on left side?
Posted: Tue Jul 13, 2021 2:56 pm
by DynMetalworks
How do I edit the the Operations buttons on the left side? I'd like to remove certain ones I don't use.
Re: How to edit toolbar on left side?
Posted: Tue Jul 13, 2021 11:46 pm
by djreiswig
I don't think you can directly edit that toolbar. You can change the machine type to remove the mill rotary buttons.
Re: How to edit toolbar on left side?
Posted: Wed Jul 14, 2021 12:35 pm
by Les Newell
Yes, that's right. Go to Options->machine and make sure only the machine types you want are selected.
Re: How to edit toolbar on left side?
Posted: Wed Jul 14, 2021 5:43 pm
by DynMetalworks
Ok thanks
Re: How to edit toolbar on left side?
Posted: Fri Jul 16, 2021 10:31 pm
by OldHippie62
If you go to Options/Application Options/Tool bars, it will give the option to edit or create new tool bars. Be careful though, it can be a little tricky.
Re: How to edit toolbar on left side?
Posted: Fri Jul 16, 2021 10:34 pm
by djreiswig
I don't think that works on the operation buttons.