Plasma Rotary Mirror Part
Posted: Mon Jan 04, 2021 6:33 pm
Hi,
Newbie using SheetCam so be gentil with me.
I was testing rotary plugin and trying to cut a P to check orientation. Simulation is ok, machine is setted using screw rule.
Result P flipped.
What can i do to correct it.
Attached photos to help ilustrate what is happening.
Machine Controller = LinuxCNC
Many thanks
Marco Lagares
Newbie using SheetCam so be gentil with me.
I was testing rotary plugin and trying to cut a P to check orientation. Simulation is ok, machine is setted using screw rule.
Result P flipped.
What can i do to correct it.
Attached photos to help ilustrate what is happening.
Machine Controller = LinuxCNC
Many thanks
Marco Lagares