Page 1 of 1
Change 'material' to 'stock'
Posted: Tue Nov 03, 2020 12:50 pm
by Les Newell
SheetCam refers to the item to be cut as the 'material'. 'Stock' is technically the correct term. Is it worth me changing this? It has an impact on the translations so I need to decide if this change is worth making.
Re: Change 'material' to 'stock'
Posted: Tue Nov 03, 2020 2:38 pm
by robertspark
makes no difference to me, but I see no benefit in the change (I am just 1 sheetcam hobby user).
Re: Change 'material' to 'stock'
Posted: Tue Nov 03, 2020 3:42 pm
by djreiswig
Doesn't matter to me if it stays material.
Re: Change 'material' to 'stock'
Posted: Wed Nov 04, 2020 11:48 am
by mica1024
I don't care.
Vectric uses 'material' too.
Re: Change 'material' to 'stock'
Posted: Wed Nov 04, 2020 2:16 pm
by Les Newell
Thanks. I won't bother to change it. I'm going through my to-do list and trying to clear up as many issues as possible before releasing the new stable.
Re: Change 'material' to 'stock'
Posted: Sun Nov 08, 2020 2:02 pm
by DenkBrettl
as a non-native English speaker I think I would rather be confused by the term "stock" for the material.