possible to load specified tool table with load machine?

Having problems with or questions about SheetCam? Post them here.
Post Reply
David_Lelen01
Posts: 68
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

possible to load specified tool table with load machine?

Post by David_Lelen01 » Thu Sep 05, 2019 6:21 pm

Hey Les,

Here's a thought for the next update... would it be possible to specify a toolset and path rules to load when a machine is loaded? With custom tool parameters defined for multiple different machines and posts, sheetcam only loads the custom parameters from whatever the post is when the program is opened. If i change to another machine, the custom tool parameters are not there unless i reload the default tool set.

I was thinking of creating a separate tool library for each machine so there are not so many in a drop down list and it would be nice if it automatically loads when i load the machine. As well as the path rules loading with the machine too.

And while i'm thinking about it maybe add a toolbar button to change machines?

Just food for thought.

David_Lelen01
Posts: 68
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

Re: possible to load specified tool table with load machine?

Post by David_Lelen01 » Fri Sep 13, 2019 8:23 pm

Hey Les,

Just wanted to revisit this one too... would it be possible to do without too much trouble?

Post Reply