how can ı fix the licence issue?

Having problems with or questions about SheetCam? Post them here.
Post Reply
Bilginer33
Posts: 4
Joined: Fri Jun 28, 2019 2:57 pm

how can ı fix the licence issue?

Post by Bilginer33 » Fri Jul 12, 2019 1:40 pm

I get this error when i try to run the post processor


This post has thrown an error:
..\ProgramFiles(x86)\SheetCam TNG\posts\MERVE.scpost:205:
attempt to call global 'checkangle (a nill value)'
Do you want to edit the post?

But Merve.scpost is correct.

User avatar
Les Newell
Site Admin
Posts: 2309
Joined: Thu May 11, 2006 8:12 pm

Re: how can ı fix the licence issue?

Post by Les Newell » Fri Jul 12, 2019 1:51 pm

That is a problem with the post processor, not the license. If you send me a copy of the post I'll take a look and see what is going on.

Bilginer33
Posts: 4
Joined: Fri Jun 28, 2019 2:57 pm

Re: how can ı fix the licence issue?

Post by Bilginer33 » Fri Jul 12, 2019 1:55 pm

Post processor is working now another small draw. But when ı add long characters it shows this error. by the way ı have a licence.

User avatar
Les Newell
Site Admin
Posts: 2309
Joined: Thu May 11, 2006 8:12 pm

Re: how can ı fix the licence issue?

Post by Les Newell » Fri Jul 12, 2019 4:13 pm

It was a post problem. This post appears to have some missing code (a function called checkangle). I took out the part that references that missing code so the post should now run. I can't guarantee that your machine will run correctly as I don't know what that missing code did.
Attachments
MERVE.scpost
(6.47 KiB) Downloaded 4 times

Bilginer33
Posts: 4
Joined: Fri Jun 28, 2019 2:57 pm

Re: how can ı fix the licence issue?

Post by Bilginer33 » Sat Jul 13, 2019 5:49 am

Hi Les, ı tried the new post.
Cut the start is above rapid clearance plane
I got this warnings
How can ı fix this?

User avatar
Les Newell
Site Admin
Posts: 2309
Joined: Thu May 11, 2006 8:12 pm

Re: how can ı fix the licence issue?

Post by Les Newell » Sun Jul 14, 2019 7:20 am

Go to Options->job options and increase the rapid clearance to be higher than your pierce height.

Post Reply