Post Processor Help

Having problems with or questions about SheetCam? Post them here.
Post Reply
MetalheadF13
Posts: 4
Joined: Tue Jun 04, 2019 10:58 pm

Post Processor Help

Post by MetalheadF13 » Tue Jun 11, 2019 2:07 am

Hi ive been staring at post processor script for hours the past 2 weeks trying to get a post processor to work for my new planet-cnc controller with no luck, if I edit one post processor to get something to work it will still tend to have another issue.

LinuxCNC post would work if I could get G92 to work to set Z at 0 then go to pierce but cant get G92 added with an error pop up in the controller software.

USB-cnc plasma post ive modified to accept the touch and go probe and works but at the end of each cut they end up on a new plane causeing the machine cooridinates to continue to rise with no reset that will cause an error since everytime the torch finishes a cut moves up 3 inches to rapid z its basically adding 3 inches height each time.

Planet-CNC support says there is a post script for my needs but still have yet to find one.

im really at a lose of what to do.
:cry: :oops:


sheetcam/planet-cnc mk3 controller/ planet-cnc 10.30 software/powermax 45xp ohmic/ proma compact THC/ DIY plasma table
Attachments
Planet-cnc TNG 10.30.PNG
Planet-cnc TNG 10.30.PNG (266.44 KiB) Viewed 142 times
sheetcam/planet-cnc mk3 controller/ planet-cnc 10.30 software/powermax 45xp ohmic/ proma compact THC/ DIY plasma table , 0lll0

robertspark
Posts: 84
Joined: Thu Feb 26, 2015 12:11 am
Location: nr Liverpool, England

Re: Post Processor Help

Post by robertspark » Tue Jun 11, 2019 6:51 am

have you got a list of all the gcodes that planetcnc uses?
Rob

robertspark
Posts: 84
Joined: Thu Feb 26, 2015 12:11 am
Location: nr Liverpool, England

Re: Post Processor Help

Post by robertspark » Tue Jun 11, 2019 6:56 am

you probably want to post a copy of the post processor you are actually using (especially if you have modified something)

and finally does planet CNC have a setting to do something such as a safe retract at the end of the file run.....

suggest post links to whatever and all planet CNC files
Rob

Post Reply