Plasma Operation

Having problems with or questions about SheetCam? Post them here.
Post Reply
sonofmitch
Posts: 1
Joined: Fri Jul 27, 2018 5:23 pm

Plasma Operation

Post by sonofmitch » Fri Jul 27, 2018 5:46 pm

I am watching the sheetcam tutorials for sheetcam tnc and my tnc does not have Plasma Cut listed under operations. How do I correct this?
Mitch

djreiswig
Posts: 61
Joined: Sat Feb 20, 2016 4:47 am

Re: Plasma Operation

Post by djreiswig » Sat Jul 28, 2018 2:39 am

It's called Jet Cutting.

WyoGreen
Posts: 176
Joined: Wed May 07, 2014 10:02 pm

Re: Plasma Operation

Post by WyoGreen » Sat Jul 28, 2018 4:06 am

Make sure you have the Jet Cutting check box checked under Options/Machine Options. That will display the Jet cutting choice under the operations.

Steve

Post Reply