Hi Les
A friend of mine has a Hurco CNC and we were wondering if SheetCam has a processor for it.
Thanks,
George
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Hurco CNC
Hi George,
Take a look at this post, perhaps it will answer your question.
http://forum.sheetcam.com/viewtopic.php?t=6353
Steve
Take a look at this post, perhaps it will answer your question.
http://forum.sheetcam.com/viewtopic.php?t=6353
Steve
Hurco CNC
Hi George,
Yes it has. You will find it in Options->machine->post processor.
Les
On 18/08/2014 22:46, George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam] wrote:
__._,_.___
Posted by: Les Newell <les.newell@fastmail.co.uk>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Yes it has. You will find it in Options->machine->post processor.
Les
On 18/08/2014 22:46, George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam] wrote:
Hi Les
A friend of mine has a Hurco CNC and we were wondering if SheetCam has a processor for it.
Thanks,
George
__._,_.___
Posted by: Les Newell <les.newell@fastmail.co.uk>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Hurco CNC
Hi Les,
I am still using ver 4.0.19 and I don't see it listed(to lazy to update my tools and settings). Is it in later versions or am I just over looking it?
Thanks,
George
On 8/19/2014 6:09 AM, Les Newell les.newell@fastmail.co.uk (les.newell@fastmail.co.uk) [sheetcam] wrote:
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
I am still using ver 4.0.19 and I don't see it listed(to lazy to update my tools and settings). Is it in later versions or am I just over looking it?
Thanks,
George
On 8/19/2014 6:09 AM, Les Newell les.newell@fastmail.co.uk (les.newell@fastmail.co.uk) [sheetcam] wrote:
Hi George,
Yes it has. You will find it in Options->machine->post processor.
Les
On 18/08/2014 22:46, George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam] wrote:
Hi Les
A friend of mine has a Hurco CNC and we were wondering if SheetCam has a processor for it.
Thanks,
George
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Hurco CNC
George-
What hurco do you have?
I had to modify the post for my mill. It is a md3 using the ultimax II controller
Steve
Sent from my iPhone
On Aug 19, 2014, at 11:04 AM, "George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam]" <sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)> wrote:
__._,_.___
Posted by: Steve Shelton <shel888@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
What hurco do you have?
I had to modify the post for my mill. It is a md3 using the ultimax II controller
Steve
Sent from my iPhone
On Aug 19, 2014, at 11:04 AM, "George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam]" <sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)> wrote:
Hi Les,
I am still using ver 4.0.19 and I don't see it listed(to lazy to update my tools and settings). Is it in later versions or am I just over looking it?
Thanks,
George
On 8/19/2014 6:09 AM, Les Newell les.newell@fastmail.co.uk (les.newell@fastmail.co.uk) [sheetcam] wrote:
Hi George,
Yes it has. You will find it in Options->machine->post processor.
Les
On 18/08/2014 22:46, George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam] wrote:
Hi Les
A friend of mine has a Hurco CNC and we were wondering if SheetCam has a processor for it.
Thanks,
George
__._,_.___
Posted by: Steve Shelton <shel888@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Hurco CNC
Thanks,
George
PS I will update my version, great program!!!
On 8/19/2014 10:07 AM, Les Newell les.newell@fastmail.co.uk (les.newell@fastmail.co.uk) [sheetcam] wrote:
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
George
PS I will update my version, great program!!!
On 8/19/2014 10:07 AM, Les Newell les.newell@fastmail.co.uk (les.newell@fastmail.co.uk) [sheetcam] wrote:
It may not be in your version. I've attached a copy.
Les
On 19/08/2014 16:04, George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam] wrote:
Hi Les,
I am still using ver 4.0.19 and I don't see it listed(to lazy to update my tools and settings). Is it in later versions or am I just over looking it?
Thanks,
George
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Hurco CNC
Hi Steve,
I don't know; the machines belongs to a friend who is just getting started in CNC. He's been a machinist forever but not into CNC. I can check with him and find out. Best I can say now it is a 1999 3 axis machine center.
Thanks,
GeorgeÂ
On 8/19/2014 10:13 AM, Steve Shelton shel888@bellsouth.net (shel888@bellsouth.net) [sheetcam] wrote:
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
I don't know; the machines belongs to a friend who is just getting started in CNC. He's been a machinist forever but not into CNC. I can check with him and find out. Best I can say now it is a 1999 3 axis machine center.
Thanks,
GeorgeÂ
On 8/19/2014 10:13 AM, Steve Shelton shel888@bellsouth.net (shel888@bellsouth.net) [sheetcam] wrote:
 George- Â
What hurco do you have?
I had to modify the post for my mill. Â It is a md3 using the ultimax II controller
Steve
Sent from my iPhone
On Aug 19, 2014, at 11:04 AM, "George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam]" <sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)> wrote:
Â
Hi Les,
I am still using ver 4.0.19 and I don't see it listed(to lazy to update my tools and settings). Is it in later versions or am I just over looking it?
Thanks,
George
On 8/19/2014 6:09 AM, Les Newell les.newell@fastmail.co.uk (les.newell@fastmail.co.uk) [sheetcam] wrote:
Â
Hi George,
Yes it has. You will find it in Options->machine->post processor.
Les
On 18/08/2014 22:46, George at6c@bellsouth.net (at6c@bellsouth.net) [sheetcam] wrote:
__._,_.___
Posted by: George <at6c@bellsouth.net>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___