RE: Assigning colours with DXF post

['Belli Button' belli@i...]

Hi Les,

Would it be possible to add a colour for each operation when using the DXF
post? I use SC with my laser cutter extensively and it would be nice to a
different colour with each operation, when it arrives at the laser I can
assign speeds/power to a colour. At the moment I re-open it in CAD and
assign colours, not monumental but to have SC do it would be great!

Cheers,



------------------------------------
Posted by: "Belli Button" <belli@iafrica.com>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/

['Belli Button' belli@i...]

Thanks man! Works very well from what I see, am I the only one using Sheet
CAM with my Chinese laser?

Cheers,

-----Original Message-----
From: sheetcam@yahoogroups.com [mailto:sheetcam@yahoogroups.com]
Sent: 29 July 2014 16:46
To: sheetcam@yahoogroups.com
Subject: Re: [sheetcam] RE: Assigning colours with DXF post [1 Attachment]

Give this a try. It uses the tool number as the colour. Valid numbers are in
the range 1-255.

Les

On 28/07/2014 22:14, 'Belli Button' belli@iafrica.com [sheetcam] wrote:

Hi Les,

Would it be possible to add a colour for each operation when using the
DXF post? I use SC with my laser cutter extensively and it would be
nice to a different colour with each operation, when it arrives at the
laser I can assign speeds/power to a colour. At the moment I re-open
it in CAD and assign colours, not monumental but to have SC do it would be

great!

Cheers,

zZWMDYXR0YWNobWVudARzbGsDdmlld09uV2ViBHN0aW1lAzE0MDY2NDUxNDk-
------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: "Belli Button" <belli@iafrica.com>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/