SheetCam TNG development V6.1.4 released for Windows and Lin
Posted: Tue May 06, 2014 6:40 pm
Hi all,
I have just uploaded Dev V6.1.4 to www.sheetcam.com. This release has
teh following changes:
Fixed: Lua editor not opening files correctly when a Lua script throws
an error
Fixed: Path rules sometimes not outputting a acrriage return at the end
of the line
Changed: lots of changes for Linux compatibility
Fixed: Sometimes need to click twice on part check box to enable/disable
the part
Changed: On start path rule text was ambiguous
Fixed: Multiple duplicate would place a part if you click middle-mouse
key or <shift>+left mouse key
Fixed: post editor tried saving to program files
Fixed: Perpendicular and tangent leadouts on open contours incorrect.
Fixed: A number of intermittent crashes
Fixed: Missing pipe wall thickness graphic
Fixed: Arc leadin/leaouts sometimes not being generated when they should be.
Fixed: Editing a post causes the post processor to stop working or thow
odd errors.
Fixed: Sim whowing incorrrect Z height when the post is set to 'top of
table' or 'top of spoil board'
Added: Compression in text plugin
Added: In tab edit mode the delete key deletes tabs
The Linux version is available in both 32 bit and 64 bit versions and
should run on most Linux distros.
Les
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
I have just uploaded Dev V6.1.4 to www.sheetcam.com. This release has
teh following changes:
Fixed: Lua editor not opening files correctly when a Lua script throws
an error
Fixed: Path rules sometimes not outputting a acrriage return at the end
of the line
Changed: lots of changes for Linux compatibility
Fixed: Sometimes need to click twice on part check box to enable/disable
the part
Changed: On start path rule text was ambiguous
Fixed: Multiple duplicate would place a part if you click middle-mouse
key or <shift>+left mouse key
Fixed: post editor tried saving to program files
Fixed: Perpendicular and tangent leadouts on open contours incorrect.
Fixed: A number of intermittent crashes
Fixed: Missing pipe wall thickness graphic
Fixed: Arc leadin/leaouts sometimes not being generated when they should be.
Fixed: Editing a post causes the post processor to stop working or thow
odd errors.
Fixed: Sim whowing incorrrect Z height when the post is set to 'top of
table' or 'top of spoil board'
Added: Compression in text plugin
Added: In tab edit mode the delete key deletes tabs
The Linux version is available in both 32 bit and 64 bit versions and
should run on most Linux distros.
Les
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/