SheetCam for Linux - finally!
Posted: Fri Apr 25, 2014 4:33 pm
Hi all,
I have been working hard on creating a new Linux release. I have
uploaded a tarball for you to test.
<http://www.sheetcam.com/Download/sheetcam.tar.bz2>. Decompress it into
any convenient folder and run the 'run-sheetcam' script. Don't try
running the 'SheetCam TNG' executable directly - it won't work. There
are a few plugins missing but hopefully it should work.
NOTE: This is a 32 bit version. If you are running a 64 bit version of
Linux you will have to install 32 bit compatibility libraries. In Ubuntu
based distros this is the ia32-libs package. I hope to produce a native
64 bit version of SheetCam but I want to get the 32 bit version working
properly first.
Les
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
I have been working hard on creating a new Linux release. I have
uploaded a tarball for you to test.
<http://www.sheetcam.com/Download/sheetcam.tar.bz2>. Decompress it into
any convenient folder and run the 'run-sheetcam' script. Don't try
running the 'SheetCam TNG' executable directly - it won't work. There
are a few plugins missing but hopefully it should work.
NOTE: This is a 32 bit version. If you are running a 64 bit version of
Linux you will have to install 32 bit compatibility libraries. In Ubuntu
based distros this is the ia32-libs package. I hope to produce a native
64 bit version of SheetCam but I want to get the 32 bit version working
properly first.
Les
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/