I'm concerned about getting rid of my Windows XP and having to upgrade to 8.1 !! I'm not a computer savvy person, and don't know if Mach3 and my Sheetcam will be compatible. Any help on this would be greatly appreciated. Thanks, Dan
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Windows 8.1
Windows 8.1
Dan
Mach is not fit for 64bit systems. Have a look at the Mach website and you will find that your only bet is to stay with XP at least for the sake of Mach. I run Sheetcam on my Windows 8.0 without any issues.
Regards
Marius
http://www.cnccontrol.co.za
http://www.mastercut.co.za
On Monday, March 10, 2014 5:10 PM, "dantechfab@yahoo.ca" <dantechfab@yahoo.ca> wrote:
I'm concerned about getting rid of my Windows XP and having to upgrade to 8.1 !! I'm not a computer savvy person, and don't know if Mach3 and my Sheetcam will be compatible. Any help on this would be greatly appreciated. Thanks, Dan
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Mach is not fit for 64bit systems. Have a look at the Mach website and you will find that your only bet is to stay with XP at least for the sake of Mach. I run Sheetcam on my Windows 8.0 without any issues.
Regards
Marius
http://www.cnccontrol.co.za
http://www.mastercut.co.za
On Monday, March 10, 2014 5:10 PM, "dantechfab@yahoo.ca" <dantechfab@yahoo.ca> wrote:
I'm concerned about getting rid of my Windows XP and having to upgrade to 8.1 !! I'm not a computer savvy person, and don't know if Mach3 and my Sheetcam will be compatible. Any help on this would be greatly appreciated. Thanks, Dan
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Windows 8.1
I believe mach will run on windows 8 but you must use an external motion controller. I have mach installed on my laptop (windows as my back up controller. I have not run my machine with it yet but it appears to function ok.
-------- Original message --------
From: dantechfab@yahoo.ca
Date:
To: sheetcam@yahoogroups.com
Subject: [sheetcam] Windows 8.1
I'm concerned about getting rid of my Windows XP and having to upgrade to 8.1 !! I'm not a computer savvy person, and don't know if Mach3 and my Sheetcam will be compatible. Any help on this would be greatly appreciated. Thanks, Dan
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
-------- Original message --------
From: dantechfab@yahoo.ca
Date:
To: sheetcam@yahoogroups.com
Subject: [sheetcam] Windows 8.1
I'm concerned about getting rid of my Windows XP and having to upgrade to 8.1 !! I'm not a computer savvy person, and don't know if Mach3 and my Sheetcam will be compatible. Any help on this would be greatly appreciated. Thanks, Dan
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___