Page 1 of 1
Naming Parts in Sheetcan
Posted: Sat Mar 01, 2014 12:39 pm
by Peter Homann
Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Naming Parts in Sheetcan
Posted: Mon Mar 03, 2014 5:09 pm
by Les Newell
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:
Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Naming Parts in Sheetcan
Posted: Mon Mar 03, 2014 5:27 pm
by Andy Wander
That could be handy
Andy Wander
On Mar 3, 2014, at 12:09 PM, Les Newell <
les.newell@fastmail.co.uk (
les.newell@fastmail.co.uk)> wrote:
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:
Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
__._,_.___
Visit Your Group
Unsubscribe ([email]
sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) •
Terms of Use
__,_._,___
Naming Parts in Sheetcan
Posted: Mon Mar 03, 2014 6:16 pm
by grinder_gary
Yes, that would be great!
Thanks Les,
Gary
On Mon, Mar 3, 2014 at 10:27 AM, Andy Wander <
andywander@yahoo.com (
andywander@yahoo.com)> wrote:
That could be handy
Andy Wander
On Mar 3, 2014, at 12:09 PM, Les Newell <
les.newell@fastmail.co.uk (
les.newell@fastmail.co.uk)> wrote:
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:
Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
--
Gary J Hall
GJ Hall Enterprises
Edmonton, AB. T6E 0G6
__._,_.___
Visit Your Group
Unsubscribe ([email]
sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) •
Terms of Use
__,_._,___
Naming Parts in Sheetcan
Posted: Mon Mar 03, 2014 8:03 pm
by Peter Homann
Hi Les,
Thanks for considering it. I'm creating 4 parts from the 1 drawing and it
would help with knowing which part is witch. If you do make a change, can you
use the part name for the file name to write when processing the part and
generating the Gcode.?
Cheers,
Peter
On 4/03/2014 4:09 AM, Les Newell wrote:
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:
Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
------------------------------------
Yahoo Groups Links
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Posted: Tue Mar 04, 2014 1:05 am
by controlman
The ability to have a name other than the drawing would keep me from having to rename files. I hope Les can work it in in. Thanks for posting the request.