V4.1.20 released

New releases and important announcements will be posted here. This is for announcements only. Please use the new features or problems forums to discuss new releases.
Post Reply
User avatar
Les Newell
Site Admin
Posts: 2576
Joined: Thu May 11, 2006 8:12 pm

V4.1.20 released

Post by Les Newell » Mon Feb 26, 2007 4:23 pm

Hi all,

I have just uploaded V4.1.20 to www.sheetcam.com. This version has the following changes:

Fixed: Detail reduction not working on open contours
Added: Parking position in Options->material
Fixed: DXF files losing the last entity if the EOF marker does not have a CRLF after it
Added: Improved collision detection on leadin/out

Note that for parking to work properly you have to modify your post. All posts supplied with SheetCam already have the mod but if you are using a custom post wou will have to modify it yourself or send it to me.

Open the post with a text editor such as Notepad and look for function finish(). In the function look for the following:
endz = safez

There also may be the following:
endx = 0
endy = 0

Delete these lines and save the post.


Post Reply