When specifying the rotary axis as 'B', in both the Rotary-plasma plugin setup and in the scpost var rotaryAxis=" B", I was expecting gcode where X axis is constant at 0 and Y axis varied in position along with B axis, since the B axis is parallel to Y, as I understand it for grbl.
Is my understanding wrong, did I miss a B axis setup step, or does Rotary-plasma plugin just support ZXA axis motion for Rnd Pipe ?
Please advise, thanks.
Rotary B axis
Rotary B axis
MillRight CNC MegaV XL XYZA Tri-CAM Mill/Plasma/Laser
grbl 1.1i, UGS, Win 11, LightBurn, SC, Aspire, and sometimes [con]Fusion360
my youtube channel
grbl 1.1i, UGS, Win 11, LightBurn, SC, Aspire, and sometimes [con]Fusion360
my youtube channel
Re: Rotary B axis
I'm not sure if this is the right answer, but for now its a workable solution...
viewtopic.php?p=31311#p31311
viewtopic.php?p=31311#p31311
MillRight CNC MegaV XL XYZA Tri-CAM Mill/Plasma/Laser
grbl 1.1i, UGS, Win 11, LightBurn, SC, Aspire, and sometimes [con]Fusion360
my youtube channel
grbl 1.1i, UGS, Win 11, LightBurn, SC, Aspire, and sometimes [con]Fusion360
my youtube channel