Selecting a suitable post processor
Selecting a suitable post processor
Hi all I am new to sheetcam I have built a plasma table using Universal g code sender and GRBL 1.1 I am having problems getting the relay that starts my torch to activate. What will be the best post processor to select
- Les Newell
- Site Admin
- Posts: 3667
- Joined: Thu May 11, 2006 8:12 pm
Re: Selecting a suitable post processor
Here are a couple of posts that may work for you.
To install a post, save the attachment to any convenient folder on your computer then run SheetCam and go to Options->machine->post processor. Click on the 'Import post' button. Using the box that appears, navigate to your post and open it. Go back to Options->machine->post processor and make sure your post is selected.
To install a post, save the attachment to any convenient folder on your computer then run SheetCam and go to Options->machine->post processor. Click on the 'Import post' button. Using the box that appears, navigate to your post and open it. Go back to Options->machine->post processor and make sure your post is selected.
- Attachments
-
- GRBL plasma no Z.scpost
- (3.05 KiB) Downloaded 52 times
-
- GRBL plasma.scpost
- (3.04 KiB) Downloaded 51 times