Inkscape image to cut in sheetcam
-
- Posts: 9
- Joined: Mon Oct 22, 2018 8:31 pm
Inkscape image to cut in sheetcam
Hello, I just started working with the cnc machine that our school got. I am trying to cut out a bulldog for our school, but cannot get it to cut correctly. Is there a way that I can cut out the white portion of the image instead of the black outline? Thanks in advance.
- Attachments
-
- 20181022_133520.jpg (1.26 MiB) Viewed 1064 times
Last edited by Ghscncclass on Tue Oct 23, 2018 7:52 pm, edited 1 time in total.
- Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: Inkscape image to cut in sheetcam
It is difficult to know exactly what you want to do from your description. A picture or drawing file would help.
- Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: Inkscape image to cut in sheetcam
Sorry, your message was in the moderation queue and attachments aren't shown then.
Use an 'outside offset'. That will make it cut outside the black areas.
Use an 'outside offset'. That will make it cut outside the black areas.