Thc wont shut off or turn on when using m666 and m667

Having problems with or questions about SheetCam? Post them here.
Post Reply
hugeracer77
Posts: 1
Joined: Wed May 30, 2018 1:22 am

Thc wont shut off or turn on when using m666 and m667

Post by hugeracer77 »

Alrite guys and gals I'm running mach3, sheetcam, and a proma 150 thc.. Using the mach 3 with probe and scriber post processor i Can't get my thc to shut off for holes using the m667 and m666 rules in sheetcam and I don't see a script file written or how to write a mach3 script to shut it off and turn back on ... Anyone know what the deal is? Thanks!!!!!
mariusl
Posts: 34
Joined: Wed Jul 27, 2011 2:56 pm

Re: Thc wont shut off or turn on when using m666 and m667

Post by mariusl »

You simply put the following lines in the macro file.

In M667.m1s
StartTHC()

and in m666.M1S
EndTHC()
Post Reply