rotary template

Having problems with or questions about SheetCam? Post them here.
Post Reply
dhelfter
Posts: 5
Joined: Tue Sep 16, 2014 1:21 am

rotary template

Post by dhelfter »

Is it possible to have the output from the rotary plugin dxf template in imperial instead of metric?
I know I can scale it in cad by 0.03937 but would be nice to output in inches.

Thanks
Dan
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: rotary template

Post by Les Newell »

That should happen automatically. Is SheetCam set to use inch units?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: rotary template

Post by Les Newell »

I just ran some tests and in inch mode it is multiplying the dimensions by 25.4 instead of dividing them. I'll release an update shortly.
dhelfter
Posts: 5
Joined: Tue Sep 16, 2014 1:21 am

Re: rotary template

Post by dhelfter »

sorry for delay.
That would make sense, when I bring the dxf in autocad I have to scale it twice by 0.03937 to get to incjes.

Thanks
dhelfter
Posts: 5
Joined: Tue Sep 16, 2014 1:21 am

Re: rotary template

Post by dhelfter »

any progress on an update for inch templates?

Thanks
Post Reply