Hi Les,I haven't had much luck getting it to run reliably enough to produce a good trace, my computer has a 3 gig processor and 2 gig's of ram... Is that enough or should I be looking at something else as the culprit?
Thanks, Steve
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Scananything question
Scananything question
Hi Steve,
That should be plenty. Scanything needs really good contrast to work. Can you clearly see the edge in mask mode while it is scanning?
Les
On 25/02/2014 19:32, steve@adnaironworks.com (steve@adnaironworks.com) wrote:
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
That should be plenty. Scanything needs really good contrast to work. Can you clearly see the edge in mask mode while it is scanning?
Les
On 25/02/2014 19:32, steve@adnaironworks.com (steve@adnaironworks.com) wrote:
Hi Les, I haven't had much luck getting it to run reliably enough to produce a good trace, my computer has a 3 gig processor and 2 gig's of ram... Is that enough or should I be looking at something else as the culprit?
Thanks, Steve
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Scananything question
Hi,
I am new user of sheet please help me i have problem in G-code.. i did set every setting but G-code does not generate.
Tri-Bros-Electric
Soharwardy Road # 14 Plot # 28E
Shalimar Town Lahore Pakistan:
Phone:+92-42-36548215
Fax: +92-42-36548214
Cell: +92-300-9452664
On Thursday, February 27, 2014 10:31 PM, Les Newell <les.newell@fastmail.co.uk> wrote:
Hi Steve,
That should be plenty. Scanything needs really good contrast to work. Can you clearly see the edge in mask mode while it is scanning?
Les
On 25/02/2014 19:32, steve@adnaironworks.com wrote:
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
I am new user of sheet please help me i have problem in G-code.. i did set every setting but G-code does not generate.
Tri-Bros-Electric
Soharwardy Road # 14 Plot # 28E
Shalimar Town Lahore Pakistan:
Phone:+92-42-36548215
Fax: +92-42-36548214
Cell: +92-300-9452664
On Thursday, February 27, 2014 10:31 PM, Les Newell <les.newell@fastmail.co.uk> wrote:
Hi Steve,
That should be plenty. Scanything needs really good contrast to work. Can you clearly see the edge in mask mode while it is scanning?
Les
On 25/02/2014 19:32, steve@adnaironworks.com wrote:
Hi Les, I haven't had much luck getting it to run reliably enough to produce a good trace, my computer has a 3 gig processor and 2 gig's of ram... Is that enough or should I be looking at something else as the culprit?
Thanks, Steve
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Scananything question
What exactly happens? Do you see the green tool paths in SheetCam?
Les
On 01/03/2014 20:08, Tri Bros Electric wrote:
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Les
On 01/03/2014 20:08, Tri Bros Electric wrote:
Hi,
I am new user of sheet please help me i have problem in G-code.. i did set every setting but G-code does not generate.Â
Â
Tri-Bros-Electric
Soharwardy Road # 14 Plot #Â 28E
Shalimar Town Lahore Pakistan:
Phone:+92-42-36548215
Fax: Â Â +92-42-36548214
Cell: Â Â +92-300-9452664
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___