Page 1 of 1

total cut distance

Posted: Sun Mar 18, 2018 9:07 pm
by ggeh
Is there a function in sheet cam that can tell me what the total cut distance is in inches? I looked in the simulation mode it gives the total seconds of the cuts but cant find the total distance of the cuts. I also clicked on the start icon and right clicked on the drawing and it tells the total of pierces but don't see anything on distance.
Thanks Gary

Re: total cut distance

Posted: Mon Mar 19, 2018 1:30 am
by djreiswig
Not sure what you are wanting to do with the total distance, but if you go to the job report it is in there.

Re: total cut distance

Posted: Mon Mar 19, 2018 2:28 am
by ggeh
Im trying to set up a spread sheet for sales. You have helped me before and I just want to say thanks again for taking the time to help us less knolageable guys like myself out.
Thanks again gary

Re: total cut distance

Posted: Mon Mar 19, 2018 3:01 am
by djreiswig
Glad to help. Still trying to repay all those that have taught me so much.