total cut distance

Request and discuss new features
Post Reply
ggeh
Posts: 12
Joined: Wed May 04, 2016 1:33 am

total cut distance

Post by ggeh »

Is there a function in sheet cam that can tell me what the total cut distance is in inches? I looked in the simulation mode it gives the total seconds of the cuts but cant find the total distance of the cuts. I also clicked on the start icon and right clicked on the drawing and it tells the total of pierces but don't see anything on distance.
Thanks Gary
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: total cut distance

Post by djreiswig »

Not sure what you are wanting to do with the total distance, but if you go to the job report it is in there.
ggeh
Posts: 12
Joined: Wed May 04, 2016 1:33 am

Re: total cut distance

Post by ggeh »

Im trying to set up a spread sheet for sales. You have helped me before and I just want to say thanks again for taking the time to help us less knolageable guys like myself out.
Thanks again gary
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: total cut distance

Post by djreiswig »

Glad to help. Still trying to repay all those that have taught me so much.
Post Reply