We've been using Sheetcam on our in-house built cnc plasma for the last year and it's worked without issue. We now need to modify our post (attached), but I haven't been able to figure out how to omit the feedrate plunge that happens after piercing, or omit the rapid move up to the safeZ after the cut is done.
I need this:
Code: Select all
N0230 M03
N0240 G01 X5.2194 Y0.3387 Z0.0600 F100
N0250 G02 X5.2194 Y0.3387 I0.0000 J0.1613 F63.0
N0260 M05
N0270 G00 Z0.2500
Code: Select all
N0230 M03
N0250 G02 X5.2194 Y0.3387 I0.0000 J0.1613 F63.0
N0260 M05
Thanks,
Josh Taylor
Turner & Taylor Metal Works, Inc.