Page 1 of 1

Rotation DXF files into nesting mode.

Posted: Sat Mar 04, 2017 11:02 am
by Andreas
Hi, you could do so, after you have loaded from a DXF drawing to be able to rotate 360 ​​° and change the colors of the lines?
Thanks.

Posted: Sat Mar 04, 2017 11:09 am
by Les Newell
There are two options. At the bottom of the SheetCam main window are boxes that show the part position and rotation. You can directly enter values in these boxes to move or rotate the part. Alternatively switch to nesting mode and click on the part you want to rotate. Now the , and . keys (< and >) will rotate your part.

Posted: Sat Mar 04, 2017 11:34 am
by Andreas
I do not find, explain to me better?

Posted: Sat Mar 04, 2017 11:36 am
by Les Newell

Posted: Sat Mar 04, 2017 11:52 am
by Andreas
Thanks!