Rotation DXF files into nesting mode.

Request and discuss new features
Post Reply
Andreas
Posts: 23
Joined: Wed Jan 25, 2017 10:15 pm

Rotation DXF files into nesting mode.

Post by Andreas »

Hi, you could do so, after you have loaded from a DXF drawing to be able to rotate 360 ​​° and change the colors of the lines?
Thanks.
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

There are two options. At the bottom of the SheetCam main window are boxes that show the part position and rotation. You can directly enter values in these boxes to move or rotate the part. Alternatively switch to nesting mode and click on the part you want to rotate. Now the , and . keys (< and >) will rotate your part.
Andreas
Posts: 23
Joined: Wed Jan 25, 2017 10:15 pm

Post by Andreas »

I do not find, explain to me better?
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Andreas
Posts: 23
Joined: Wed Jan 25, 2017 10:15 pm

Post by Andreas »

Thanks!
Post Reply