Arc Leadin/Leadout by diameter

Request and discuss new features
Post Reply
aeviaanah
Posts: 6
Joined: Thu Apr 23, 2015 11:56 pm

Arc Leadin/Leadout by diameter

Post by aeviaanah » Wed Jun 03, 2015 12:28 am

It would be nice to have an arc lead out by diameter rather than by length of the arc.

I like to set a prestop to just as the part falls and have leadout programmed so the machine motion continues the path true to the diameter of the hole. This is not possible using the current arc leadout by length.

Possible use diameter in conjunction with angle or circumference.

Post Reply