Job report/job costing

Request and discuss new features
Post Reply
Vmax549
Posts: 641
Joined: Mon Nov 09, 2009 5:55 pm

Job report/job costing

Post by Vmax549 »

Hi Less, I was wondering IF the job report could include the x/y extense for the part cut in plasma. This would give us a better grip on costing out the job material wise.

Also wondering IF you could include a costing formula base on material size and thickness and cutting inches and starts.

Maybe a simple plugin to control cost factors?

Thanks For all the hard work, (;-) TP




-------------------- m2f --------------------

Reply to this post simply by hitting reply in your email client or you can read this topic online here:
http://www.forum.sheetcam.com/viewtopic ... 0817#10817

-------------------- m2f --------------------
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Job report/job costing

Post by Les Newell »

X,Y extents are a good idea. I'll add them to the to-do list.

Costing is a bit more tricky. Presumably you would want to work it out from the following:
cost per square inch (based on X,Y extents)
cost per pierce
cost per inch of cutting.

I'll have to think on this one.




-------------------- m2f --------------------

Reply to this post simply by hitting reply in your email client or you can read this topic online here:
http://www.forum.sheetcam.com/viewtopic ... 0818#10818

-------------------- m2f --------------------
Vmax549
Posts: 641
Joined: Mon Nov 09, 2009 5:55 pm

Job report/job costing

Post by Vmax549 »

Perhaps a small database for the material selction that would allow us to include material cost for each selection.

Then just use the extents for the square inches and the starts and cut inches.

I guess you would also need a cost input for the starts and cost per inch for cuts.

Thanks for the consideration, (;-) TP




-------------------- m2f --------------------

Reply to this post simply by hitting reply in your email client or you can read this topic online here:
http://www.forum.sheetcam.com/viewtopic ... 0819#10819

-------------------- m2f --------------------
dmclements
Posts: 1
Joined: Mon Jan 05, 2015 7:13 am

Post by dmclements »

Any progress on the costing?
WyoGreen
Posts: 257
Joined: Wed May 07, 2014 10:02 pm

Post by WyoGreen »

Over on PlasmaSpider.com they have an excel spreadsheet that seems to work pretty good for pricing things out. You might want to pop over there and take a look at it.

Steve
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Sorry,

I've been really busy just recently and haven't had time to look at this yet.
tnbndr
Posts: 1
Joined: Thu Feb 12, 2015 1:47 am
Location: New Berlin, WI

Post by tnbndr »

Came across this on Plasmaspider this morning. Read the post from Vmax near the end.
Would be really interested in this plug in.

http://www.plasmaspider.com/viewtopic.php?f=88&t=16283
Post Reply