Laser engraving

General chat and non SheetCam related discussion
Post Reply
lau
Posts: 8
Joined: Sat Sep 10, 2016 8:11 am

Laser engraving

Post by lau »

When i am in the "Raster Engraving" dialog for direction i can only choose left to right "X Axis" on my machine ..

is it possible to make the direction go along the "Y Axis" ?
Attachments
Laser.PNG
Laser.PNG (100.47 KiB) Viewed 9779 times
Laser.PNG
Laser.PNG (100.47 KiB) Viewed 9779 times
lau
Posts: 8
Joined: Sat Sep 10, 2016 8:11 am

Post by lau »

solved , rotate part by 90 Degrees
Attachments
Laser.PNG
Laser.PNG (42.75 KiB) Viewed 9776 times
jammartinez760
Posts: 3
Joined: Thu Aug 03, 2017 7:14 am
Location: USA

Post by jammartinez760 »

awe food idea :)
Post Reply