X0.0001 is to long for Heidenhain
The one micron in metric is 0.001
Heidenhain Post doesn't work
Re: Heidenhain Post doesn't work
I check 0.0001 on tnc530 - work ok
but on my tnc151b doesn't work, wrong code error
but on my tnc151b doesn't work, wrong code error
Re: Heidenhain Post doesn't work
Hi,
One year ago we tried to fix the Heidenhain Post Processor TNC 410. Now i found the way.
Last circle on ( endZ ) has to be repeated do take rest of material.
Please look on pictures.
Coul You add some lines to post?
One year ago we tried to fix the Heidenhain Post Processor TNC 410. Now i found the way.
Last circle on ( endZ ) has to be repeated do take rest of material.
Please look on pictures.
Coul You add some lines to post?
- Attachments
-
- Untitled.job
- (7.01 KiB) Downloaded 60 times
-
- DSC_6634.JPG (1.9 MiB) Viewed 1573 times
-
- DSC_6633.JPG (1.87 MiB) Viewed 1573 times
- Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: Heidenhain Post doesn't work
I'm not sure exactly what you mean. Which circle needs to be duplicated?
Re: Heidenhain Post doesn't work
Thanks for reply.
Place where I mark red lines is diferent color, material to take out.
Place where I mark red lines is diferent color, material to take out.
Last edited by quarkq on Thu Nov 24, 2022 4:47 pm, edited 1 time in total.
Re: Heidenhain Post doesn't work
HI Les
I check code in machine made in 2021.
Simulation give error : " circle wrong programed "
Is it possible to change accuracy of math calculations to exactly 0.001 without something more....
I check code in machine made in 2021.
Simulation give error : " circle wrong programed "
Is it possible to change accuracy of math calculations to exactly 0.001 without something more....
Last edited by quarkq on Sat Nov 26, 2022 1:05 pm, edited 1 time in total.
- Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: Heidenhain Post doesn't work
At the moment the resolution is set to 0.0001. Edit the post and do a search and replace. Wherever you see 0.0###, change it to 0.0##
Re: Heidenhain Post doesn't work
Yes. in the post is 0.0001.
What about calcuating in sheetcam. Is it the same accuracy?
What about calcuating in sheetcam. Is it the same accuracy?
- Les Newell
- Site Admin
- Posts: 3668
- Joined: Thu May 11, 2006 8:12 pm
Re: Heidenhain Post doesn't work
Internally SheetCam calculates to a far greater accuracy than 0.0001".
Re: Heidenhain Post doesn't work
Thanks Les.
I tried to figerout how to fix this bug, because i can't use pocket operation in my heidenhain.
TNC do calculate from point to point, there is no place for mistake.
Last year I wrote:
The start circle point after plunge arc (CP IPA-196.648 Z-6.000 DR-) has to be exacly in the same point.
On some shape the Post calculate 0.002mm mistake. The last circle is little, about 0.002 mm long, maby less.
Machine do little arc and do not go around as should.
I don't know how far is heidenhain accuracy. 0.00001 or 0,00000001.....
I post same program but diferent accuracy:
1. 0.001
CP IPA-196.648 Z-6.000 DR-
C X+36.471 Y-29.967 DR- R0 F200
2.0.00001
CP IPA-196.64828 Z-6.00000 DR-
C X+36.47065 Y-29.96732 DR- R0 F200
Could You look again to this. Especially on C X+36.47...
Regards quarkq
I tried to figerout how to fix this bug, because i can't use pocket operation in my heidenhain.
TNC do calculate from point to point, there is no place for mistake.
Last year I wrote:
The start circle point after plunge arc (CP IPA-196.648 Z-6.000 DR-) has to be exacly in the same point.
On some shape the Post calculate 0.002mm mistake. The last circle is little, about 0.002 mm long, maby less.
Machine do little arc and do not go around as should.
I don't know how far is heidenhain accuracy. 0.00001 or 0,00000001.....
I post same program but diferent accuracy:
1. 0.001
CP IPA-196.648 Z-6.000 DR-
C X+36.471 Y-29.967 DR- R0 F200
2.0.00001
CP IPA-196.64828 Z-6.00000 DR-
C X+36.47065 Y-29.96732 DR- R0 F200
Could You look again to this. Especially on C X+36.47...
Regards quarkq