Problem when loading G-code into cnc machine

Having problems with or questions about SheetCam? Post them here.
Post Reply
iesnz
Posts: 1
Joined: Mon Jun 07, 2021 10:34 pm

Problem when loading G-code into cnc machine

Post by iesnz »

When loading the G-code generated in sheetcam into our steel tailor unit, the following happens. Any insight into what the problem could be?
Attachments
before
before
2.jpg (15.58 KiB) Viewed 306 times
after
after
1.jpg (18.55 KiB) Viewed 306 times
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Problem when loading G-code into cnc machine

Post by Les Newell »

It looks like a mismatch in how arc centres are specified. They can be either incremental or absolute. Your post is probably configured for incremental while your control is set for absolute or vice-versa.
What post processor are you using?
Post Reply