Sheetcam

Having problems with or questions about SheetCam? Post them here.
Post Reply
ELMO
Posts: 4
Joined: Tue May 18, 2021 7:08 pm

Sheetcam

Post by ELMO »

I have upgraded to sheetcam TNG V7.0.13 is this correct or do I need to use sheetcam TNG Development V7.0.14 ? Still having a problem. Won’t accept dxf followed everything I can read I am pretty sure all settings are correct. Thanks
REMfg
Posts: 2
Joined: Fri May 21, 2021 6:52 pm

Re: Sheetcam

Post by REMfg »

we went with 7.1.14
FabLab
Posts: 16
Joined: Sun Mar 25, 2018 2:33 am

Re: Sheetcam

Post by FabLab »

Both versions should accept a dxf, if you a willing to upload your dxf I would be happy to take a look & see if I can help..
ELMO
Posts: 4
Joined: Tue May 18, 2021 7:08 pm

Re: Sheetcam

Post by ELMO »

Thank you for getting back to me. I will have to get someone to help send the file. I have had sheetcam for over a year. It worked fine
till bought the thc with firecontrol. Done all downloads and upgrades now it wont accept dxf. Just dont understand a lot about computers.
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: Sheetcam

Post by Les Newell »

When you import a drawing, is the file type set to 'DXF files'? In windows the file type is usually just above the open and cancel buttons in teh file selector box.
Post Reply