Post processor failed

Having problems with or questions about SheetCam? Post them here.
Post Reply
pgilley
Posts: 25
Joined: Tue May 14, 2019 11:09 pm

Post processor failed

Post by pgilley »

This problem is happening for some files and not others. The message I receive from Sheetcam when this happens is:
An unexpected error has occurred :
Unable to open output file F\Julia1.tap
This error occurred on line 1197 in file ..
\Comlib\postmacro.cpp)
Post processing failed
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: Post processor failed

Post by Les Newell »

Either drive F is not writeable or that file is locked. Try saving it to a different drive.
pgilley
Posts: 25
Joined: Tue May 14, 2019 11:09 pm

Re: Post processor failed

Post by pgilley »

I have other files on same drive that work. Also cannot connect to update server. The Sheetcam version I am using is a rather old version. 6.0.30 version
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: Post processor failed

Post by djreiswig »

Not sure if it's your problem or not, but your file path is missing a colon after the drive. Should be F:\Julia1.tap
pgilley
Posts: 25
Joined: Tue May 14, 2019 11:09 pm

Re: Post processor failed

Post by pgilley »

My fault about the colon. Missed it when typing message.
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: Post processor failed

Post by djreiswig »

Dang. I thought I was on to something. :roll:
pgilley
Posts: 25
Joined: Tue May 14, 2019 11:09 pm

Re: Post processor failed

Post by pgilley »

Had some problem with files not post processing ever since I updated to 7.0.13 version. Liked the older versions better. Less complicated. I have an older plasma table working with Windows XP. Just hobby work.
Post Reply