Post Process issues

Having problems with or questions about SheetCam? Post them here.
Post Reply
dehnertmatt
Posts: 1
Joined: Sun May 09, 2021 10:22 pm

Post Process issues

Post by dehnertmatt »

I am working on getting my new machine working and I am having issues. When I load the program into Mach3 it is giving me the fault (Radius to end of arc differs from radius to start). According to the Mach3 pages, this means that I need to set the Distance mode and IJ mode to Absolute, which they both are in but my post processer looks like it is calling for the IJ mode to be in INC. Anyone able to help me troubleshoot this? I can clear the fault and get the machine moving on the program but the first operation is to cut a .05" hole and its trying to cut a hole probably 4" or so that is a whole other issue.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Post Process issues

Post by Les Newell »

The IJ mode should be set to INC.
Post Reply