Problem while generating g code

Having problems with or questions about SheetCam? Post them here.
Post Reply
Kartikbabanswami
Posts: 2
Joined: Thu Apr 15, 2021 2:31 pm

Problem while generating g code

Post by Kartikbabanswami »

Respected sir,
After clicking the post processor button , it is showing the message of Post processor is completed but the size of that .tap file is very low...quite low..
After opening that file in mach 3 it consist of only two to three lines of g code...
I can't able to write full g code of my .DXF file

Please reply me..plz sir plz .
Waiting for your reply...🙏
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: Problem while generating g code

Post by djreiswig »

Have you created operations for your cutting? That's usually what causes no gcode for me.
Kartikbabanswami
Posts: 2
Joined: Thu Apr 15, 2021 2:31 pm

Re: Problem while generating g code

Post by Kartikbabanswami »

I created cutting operation..it is showing the green path lines ..but also it us not generating the g code..
Post Reply