Lead-in speed to slow?

Having problems with or questions about SheetCam? Post them here.
Post Reply
Xyphota
Posts: 4
Joined: Sat Oct 17, 2020 12:50 am

Lead-in speed to slow?

Post by Xyphota » Thu Apr 08, 2021 10:56 pm

Hello All,

I am attempting to use the rotary plasma plugin to cut some tubes on a custom machine I made with some fellow university students. The machine is controlled through Mach4 if it mattes.

For some reason, the lead-ins generated have a significantly slower surface speed. Is there a setting to adjust this somewhere? Alternatively is it common for the lead-ins to be slow? I would understand it would take a bit of time for the arc to pierce the material, but we are cutting 0.035" thick tube.

Cheers

Post Reply