Multiple machines setup

Having problems with or questions about SheetCam? Post them here.
Post Reply
mariusl
Posts: 34
Joined: Wed Jul 27, 2011 2:56 pm

Multiple machines setup

Post by mariusl »

Hi,
I am using Sheetcam to generate gcode for multiple machines. Not just for myself but for customers to give support while they are training. I used to just make a copy of the EXE and named it to the machine to match. It would seem that that is no longer possible and I assume the feature of saving a machine will make up for that.
So my question is, is there a way to tell what machine config is loaded without having to go to the machine setup menu?
Also is it possible to assign a post processor to a machine config and have it load when that machine config i s loaded?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Multiple machines setup

Post by Les Newell »

Take a look at this thread. It covers multiple profiles viewtopic.php?t=6654&sid=18a46e9185fd7c ... ddc5688365
Post Reply