Plasma Rotary Mirror Part

Having problems with or questions about SheetCam? Post them here.
Post Reply
Posts: 1
Joined: Wed Dec 02, 2020 1:01 pm

Plasma Rotary Mirror Part

Post by marcolagares » Mon Jan 04, 2021 6:33 pm


Newbie using SheetCam so be gentil with me.

I was testing rotary plugin and trying to cut a P to check orientation. Simulation is ok, machine is setted using screw rule.
Result P flipped.
What can i do to correct it.

Attached photos to help ilustrate what is happening.

Machine Controller = LinuxCNC

Many thanks
Marco Lagares
PlasmaRotary LinuxCNC_teste_neg.scpost
(7.74 KiB) Downloaded 20 times
Part.jpg (45.5 KiB) Viewed 886 times
P_Rot.jpg (23.77 KiB) Viewed 886 times

Post Reply