Incorrect work with the Fangling machine

Having problems with or questions about SheetCam? Post them here.
Post Reply
alexlom
Posts: 1
Joined: Mon Dec 28, 2020 6:39 pm

Incorrect work with the Fangling machine

Post by alexlom »

Hey.
I have a Koike PNC10 machine with a FangLing FLMC 2100
I am creating work and control program. I transfer it to the machine and get the arc in the opposite direction.
In the machine, the default coordinate system is relative.
If I change the coordinate system to absolute in the machine, I get the error.
I attach photos of errors and job files.
I hope for your help.

Sorry for my English
Attachments
Claas600.job
Job
(5.3 KiB) Downloaded 118 times
Switched the machine to an absolute coordinate system.
Switched the machine to an absolute coordinate system.
absolute.jpg (477.47 KiB) Viewed 4815 times
The arc in the opposite direction
The arc in the opposite direction
relative.jpg (548.49 KiB) Viewed 4815 times
Post Reply