post processor enquiry

Having problems with or questions about SheetCam? Post them here.
Post Reply
johan coetzee
Posts: 1
Joined: Sun Oct 25, 2020 6:40 pm

post processor enquiry

Post by johan coetzee »

I want to buy sheetcam, but i used the evaluation software and i dont know what post processor to choose. i think my machine will need one made specifically. Is there anyone who could advise, i am new to plasma cutting. i have a metalwise cnc plasma Mach 2.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: post processor enquiry

Post by Les Newell »

Is that machine running Mach2? If so the 'Mach3 plasma' post processor should work.
Post Reply