Page 1 of 1

Print tool table

Posted: Tue Jul 28, 2020 12:55 pm
by David_Lelen01
Got another crazy idea.... is it possible to print the tool table as displayed in sheetcam? I know i can open the excel file and print from there, but it is not formatted all nice and pretty and easily legible. I would say i could just screenshot the tool table window, but unfortunately i have too many tools to display all on one screen and the print quality of the resulting screenshot is terrible.

Re: Print tool table

Posted: Tue Jul 28, 2020 2:12 pm
by djreiswig
Can't you open the excel file and format it all pretty? I don't know what it looks like, but formatting in excel isn't all that difficult.
If it's delimited, then text to columns should make it all pretty.

Re: Print tool table

Posted: Fri Jul 31, 2020 12:47 pm
by David_Lelen01
Can't you open the excel file and format it all pretty? I don't know what it looks like, but formatting in excel isn't all that difficult.
If it's delimited, then text to columns should make it all pretty.
I'm sorry, the way i worded that was incorrect. The tool table is not actually stored as an excel file, i just use excel to do mass editing of several tools at one time. The tool table is actually a text file with each and every parameter on a new line. No CSV, no delimiters, anything like that. At least as far as i have figured out so far.

Re: Print tool table

Posted: Fri Jul 31, 2020 1:34 pm
by djreiswig
I've never looked at the actual file, but I'm sure there is a way to format it the way you want it. You could always write a macro in excel to clean it up.
I'll look at it when I get a chance and see if I can figure something out.

Re: Print tool table

Posted: Fri Jul 31, 2020 4:41 pm
by Les Newell
The dev version of SheetCam has the option to save a tool table as CSV. File->import/export toolset.

Re: Print tool table

Posted: Fri Jul 31, 2020 5:26 pm
by djreiswig
Question for Les. At what point do some of the new features in the Dev version get moved over to the stable version? I have tried the Dev version a few times, but I seem to have issues with it crashing on me, so I keep going back to the stable version.
I would like to see the lead settings assigned to the tools for one.
Something like exporting the tool table would seem to be a simple addition that wouldn't cause any problems.