Sheetcam Error Messagre

Having problems with or questions about SheetCam? Post them here.
Post Reply
J Dyche
Posts: 1
Joined: Mon Jun 29, 2020 8:51 pm

Sheetcam Error Messagre

Post by J Dyche »

I have only had the program for less than a month. When I first got it and activated my license all worked great and was fully impressed. Tried using again yesterday and today and every file I import will not create a tool path for gcode. All I get is this error message (see below). Tried the file I first had success with and the same thing, the one in pic. Any help would be greatly appreciated so I can have use of the program I paid for.
Attachments
Sheetcam Error.png
Sheetcam Error.png (62.73 KiB) Viewed 460 times
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: Sheetcam Error Messagre

Post by djreiswig »

You need to select the layer in your operation. The layer name you is selected is not in the drawing file you loaded. It defaults to the previous layer you selected in the last drawing. This drawing must not have that layer.
Post Reply