Page 1 of 1
Selecting a suitable post processor
Posted: Fri Jun 19, 2020 5:35 pm
by Cliff
Hi all I am new to sheetcam I have built a plasma table using Universal g code sender and GRBL 1.1 I am having problems getting the relay that starts my torch to activate. What will be the best post processor to select
Re: Selecting a suitable post processor
Posted: Mon Jun 22, 2020 4:10 pm
by Les Newell
Here are a couple of posts that may work for you.
To install a post, save the attachment to any convenient folder on your computer then run SheetCam and go to Options->machine->post processor. Click on the 'Import post' button. Using the box that appears, navigate to your post and open it. Go back to Options->machine->post processor and make sure your post is selected.