Scanything

Having problems with or questions about SheetCam? Post them here.
Post Reply
TReimer
Posts: 5
Joined: Tue Jun 16, 2020 3:15 pm

Scanything

Post by TReimer »

Hello,

i´m trying to calibrate my camera.
The manual movement is working perfect, but if i start the calibration, it found the first circle and overshoots the next time.
The orientation should be okay.

What could be the problem?
I haven´t bought a licence yet, i would first trying this, is it a problem?

best regards,
Thomas Reimer
robertspark
Posts: 257
Joined: Thu Feb 26, 2015 12:11 am

Re: Scanything

Post by robertspark »

I struggled on the orientation on mine and rotated the camera 180 degrees and it worked for me (I'm guessing it's the mirror reflection of the image.... right appearing on the left and left appearing on the right maybe)
WyoGreen
Posts: 257
Joined: Wed May 07, 2014 10:02 pm

Re: Scanything

Post by WyoGreen »

I think rob's right on his diagnosis. When I played with this a long time back, that was the problem I had. After rotating the camera 180 degrees, everything worked fine.

Steve
Post Reply