Tabs disappear when adjusting tab settings

Having problems with or questions about SheetCam? Post them here.
Post Reply
lumberjack_jeff
Posts: 9
Joined: Sat Feb 29, 2020 4:10 am

Tabs disappear when adjusting tab settings

Post by lumberjack_jeff »

Version 6.1.71

closed, outside offset profile toolpath from dxf. Create tabs - > save drawing and postprocess.

Reopen .job file, change height of tabs, click ok. Tabs disappear. I don't remember this to be expected behavior?
lumberjack_jeff
Posts: 9
Joined: Sat Feb 29, 2020 4:10 am

Re: Tabs disappear when adjusting tab settings

Post by lumberjack_jeff »

To clarify: Clicking OK after selecting "edit operation" erases all tabs - whether or not any changes have been made to the toolpath.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Tabs disappear when adjusting tab settings

Post by Les Newell »

Sorry for the delay in replying. This definitely should not happen and I am working on a fix. Thanks for letting me know about it.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Tabs disappear when adjusting tab settings

Post by Les Newell »

I have just uploaded a new release that should fix the problem.
Post Reply