ISO Post Processor for Amada Apelio II-357v

Having problems with or questions about SheetCam? Post them here.
Post Reply
MDInexhaust
Posts: 1
Joined: Mon Feb 10, 2020 1:08 pm

ISO Post Processor for Amada Apelio II-357v

Post by MDInexhaust »

I now have an Amada Apelio II-357V laser/turret punch combo with a Fanuc controller. I am looking for a post processor to write the laser (and potentially punch) G/M code. Any help would be appreciated. Willing to pay for good working code.

Thanks :)
Matthew Dean
CNC operator,
Innovative Exhaust Solutions
Lincoln, Nebraska, USA
cnc@inexhaust.com
(402) 446-2450
Top
User avatar
djreiswig
Posts: 482
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: ISO Post Processor for Amada Apelio II-357v

Post by djreiswig »

Can you post a sample working gcode file showing the format you need?
Top
Post Reply

Return to “Problems and questions”