dfx problem

Having problems with or questions about SheetCam? Post them here.
Post Reply
YFAB44W
Posts: 2
Joined: Sat Dec 28, 2019 1:35 am

dfx problem

Post by YFAB44W »

When I import a dxf file to sheetcam it comes in to the program (in the parts box) as the part number not as the layers of the part , this is after upgrading to full license. what might need reset to solve this problem. using program for cnc plasma
Also: I tried importing a dfx that I had used before, that worked fine in the past, but now does not work
WyoGreen
Posts: 257
Joined: Wed May 07, 2014 10:02 pm

Re: dfx problem

Post by WyoGreen »

Is the layer box visible when you import the drawing? Perhaps all that is needed is to click on the View menu item and then click on the Layer Tool.

Steve
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: dfx problem

Post by Les Newell »

The 'parts' box only shows the drawing name (usually based on the file name). Do you see the drawing outlines? To see the layers listed turn on View->Layer tool.
Post Reply